Windows 98 Auto Install Iso Download

Return to site

Windows 98 Auto Install Iso Download

Windows 98 Auto Install Iso Download Windows 10
Windows 98 Iso Full Download
Tutorials (oldest first)‎ > ‎ 
117 - Install Windows 98SE/ME from an ISO file on an Easy2Boot USB driveThe instructions below will allow you to add a Windows 98 ISO file to your Easy2Boot drive and install Win98 to an internal hard disk.It should also work for Windows ME.



YouTube Video


IntroductionIf you would like to be able to re-install Windows 98 or Me onto a system that perhaps has a broken CD-ROM, then you can do so using Easy2Boot.
RequirementsBefore we start however, please remember that Win98 is a very old Operating System and so is quite tricky to install on modern systems. 
The 98/Me browser is very old - most websites will not display correctly in any Win98/Me browser, so internet access is extremely limited!
Check here for a list of compatible mainboards. 
Please check the following requirements before you begin!
The target system must be able to boot from a USB drive (Flash or HDD)
The target system must have an IDE hard disk drive (SATA drives may not work - set the 'Legacy/IDE' setting in the BIOS setup menu if you have a SATA hard drive fitted - do not use 'AHCI')
Older system BIOSes may have a 137GB hard disk limit - installing onto a hard disk larger than 137GB may cause problems (also using a USB Hard Disk larger than 137GB may cause problems - E2B will warn you if this is the case) - see here for more details.
Your target system will need 256MB or more of memory (the ISO contents are copied to RAM) - however, systems with more than 1GB may also cause memory problems.
You will need a utility to delete some folders from inside the Win98SE ISO - e.g. Daemon Tools Pro or UltraISO (so you don't lose the boot sectors from the ISO).
Win98 may not have the correct drivers for your audio, network and graphics devices
Windows 98 SE ISO (you will have to obtain this yourself) - the ISO can be bootable (preferred) or non-bootable. Try here (OEM Full is bootable) or here.
(optional) Windows 98 SE 1.44Mb floppy .img image file (you will have to obtain this yourself) - only required if the Win98 ISO is not bootable.
If you wish to try this by using a Virtual Machine (e.g. Oracle Virtual Box), ensure you configure it for Windows 98, use a small amount of memory for Display VGA memory and not more than 1GB of system memory (RAM). Use an IDE virtual hard disk.
Prepare the USB drive1. Make an E2B bootable USB drive from www.easy2boot.com
2. Check that you can boot the E2B USB drive on your target system - if not then you cannot proceed any further!
3. (optional) Edit the Windows 98 SE ISO file that you have obtained and leave only the files in the root (top level) and the win98 folder. 
Save the ISO file. I used Daemon Tools Pro for this. UltraISO also works.
The reason that we need to delete the other folders is that the E2B copy process will fail if there are too many files. 
Also, we don't need these folders to install Windows 98.
If you like, you can try the ISO without editing it first, but it may fail to load or install properly.
4. If the ISO is not bootable (check with 7Zip - Open Archive, look for a [BOOT] folder containing a Bootable_1.44M.img file) then you will need to find and download an MS-DOS floppy disk image.
If the ISO does contain a bootable 1.44Mb floppy image as [BOOT], you only need the ISO file and you do not need a separate .IMG file.
4a. If your Win98SE ISO is bootable:
Simply copy the reduced-size ISO (approx 180MB) to the E2B USB drive _ISOMAINMENU folder and rename the file to have the .ISODOS01 file extension
(optional) Create a .txt file of the same name as the Win98SE ISO containing the menu entry that you want to appear in the E2B Main menu instead of just the name of the ISODOS01 file - e.g.:
title Win98SE Install (ISO)n Choose 2 Boot from CD-ROM then 3 without CD-ROM option 2n Run FDISK to partition the HDDn Then reboot and run Format.n Change to drive B: and type Setup to install Win98

This completes the USB drive preparation if your Win98SE ISO was bootable.
4b. If your Win98SE ISO is not bootable:
Copy the reduced-size Win98SE ISO and the .IMG file to the _ISOMAINMENUWin98 folder (you will need to make a Win98 folder on the E2B USB drive)
Use Notepad to create a new file at _ISOMAINMENUInstWin98SE.mnu with the following contents (change the filenames in bold type to match your filenames):
title Win98SE Install (ISO+FD IMG)n Choose non-CDROM option 2n Run FDISK to partition the HDDn Then reboot and run Format.n Change to drive B: and type Setup
cat --length=0 %ISO% ;; set /a LEN=*0x8290 ;; echo Length of %ISO% is %LEN% bytes
# Allow for PBR sectors etc. - must be FAT16 so over 0x20000
# call the copy batch file - first parameter is either (fd0) or (fd1) - next parameter is size of virtual drive (0x100000=512MiB)
pause --wait=3 PLEASE NOTE: Contents of CD are now on drive B:
# set number of floppies seen by BIOS - must be 2 if using (fd1) instead of (fd0)
chainloader /io.sys || chainloader /kernel.sys || chainloader (0xff)
5. Be sure to run WinContig (RMPrepUSB - Ctrl+F2) to make all the files contiguous.
You should now have a bootable USB drive with which can install Win98SE. 
Installing Windows 98SE1. Boot from the USB E2B drive on the target system. 
Select the .isodos01 file and run it.
If you see some error messages as the files are copied to memory, this is usually because the ISO contains files with long filenames - these are not required for the install process and so won't cause a problem.
Note that Win98 will make the first hard disk partition Active and MS-DOS bootable. Therefore the first internal hard disk will be modified by this process even if you install Win98 to a different hard disk or partition!
2. If you see a message to boot from the Hard Disk or CD-ROM, choose the 'Boot from CD-ROM' option. Note: After 10 seconds it may automatically try to boot from the hard drive - so watch for the menu - don't walk away!
3. When you see a message like that below, choose Option 3 to boot without CD-ROM support:



We need to format the target system's drive as FAT32. 
Type FDISK and press the ENTER key and answer 'Y' to the questions about large disk support.
Now select option 5 and check that Disk 1 is the drive that you want to install Win98 onto. 
If it is not then be warned that if you proceed, the Win98 Setup process may make boot loader changes to Disk 1 anyway as it will treat it as the Win98 boot drive even if you later choose to install Win98 to a different drive volume!
5. Press  to return to the main FDISK Options menu and use the menu to create a DOS Primary bootable partition on Disk 1.
When this has been created, you must reboot again from the Win98SE ISO using E2B exactly as before (repeat steps 1-4 above).
Note: FDISK may be old and may not work with large hard drives properly! In 1998, all hard disks were IDEATAPI (not SATA) and were smaller than 137GB!
You may have problems if your hard disk is larger than 137GB. FDISK may report 'weird' sizes.
6. Now we can format the new partition. Run FDISK again and choose Option 5 again - check that Drive C: is on the target drive (we don't want to format our USB drive!).
If all looks OK, quit FDISK and type 
to format the drive. (on Windows ME, format.com will be in the B:Win9x folder).
7. Now we are ready to install Windows 98 to the blank, freshly formatted (FAT32) drive C:. 
At the MS-DOS command prompt, type B: and press the ENTER key to switch to the B: drive. 
Now type SETUP and then press the ENTER key. This starts the Windows install process. 

If you get an error about a TEMP folder, type the following commands to make Setup use a folder on the B: drive as a temporary folder:
mkdir B:TEMP

Use C:Windows as the install folder. 
When requested to make Startup (floppy) Disk, click Next and then Cancel.

8. The Win98 Setup process will restart several times - you can remove the E2B USB drive at this point so that it reboots directly from the internal hard disk.
If you boot from the E2B USB key (e.g. if using a VM) then just press F7 in the E2B menu to boot from the internal hard disk again.
I successfully used a Win98 key BPKBQ-?????-?????-?????-28FW3 after the first restart of a Retail Win98SE install (Google for it!).


If you find your E2B USB drive no longer boots to the E2B menu, try RMPrepUSB - Install grub4dos - MBR=Y to fix it.
Windows 95 ISO free. download full version iso bootable image file to burn on CD or install via USB. It is the full offline installer standalone setup direct single click download setup file. You can also get Windows 98 ISO. Windows 95 Overview. Windows was the most outstanding Operating System developed by Microsoft. Windows 98 Second Edition.ISO is being hosted on the-eye.eu.This file is of ISO file extension.The size of this file is 623.51 MB.You can download the file.
Windows 98 ISO Download: It has been a long time since Microsoft imagined the principal graphical OS. With Windows 98 going to the fore, Microsoft promptly approved its turn of propelling the 9x arrangement in any case. Windows 98 took after the immensely effective Windows 95 and approached as an ideal alternative for clients who depend vigorously on home frameworks, web surfing, media, and gaming. All the more along these lines, Windows 98 OS was best known for its media bolster and the excellent ability with regards to perusing USBs and DVDs. The LAN offices were are as yet perfect even following two many years of its prime. To be correct, it was Windows 98 OS which started the idea of web working by enabling clients to impart one web association with numerous devices.
Contents
3 Windows 98 ISO Technical Details and System Requirements for Windows 98 Download:-
Windows 98 Download details:It approached as a working framework that struck the ideal harmony amongst usefulness and ease of use. What inspired PC nerds the most is the capacity of Windows 98 to adjust as indicated by the individual necessities. In addition, this OS, as far as feel, exhibits a tasteful design without bargaining on usefulness. The ISO adaptation related with this OS approaches as a bootable interpretation of the first form and can be introduced by sending a bootable DVD.
Windows 98 Features:When it comes to enlisting the feature sets associated with this OS, we have quite a few to look at. Most of these attributes, however, focus on functionality and resourcefulness.
Offers Extensive support when it comes to Connecting with preexisting and new networks
Comes with a built-in Internet Explorer 4.0 which is not as slow as some of the succeeding versions
Supports efficient internet sharing
Comes with optimized networking via VPNs
Now when we have meandered through the basics features associated with Windows 98 OS, it's time to delve into the technical details associated with the same. Moreover, we have also enlisted some downloadable links associated with this OS and its ISO version.
Windows 98 ISO Technical Details and System Requirements for Windows 98 Download:-At first, we need to ascertain the software name and how users shall relate to the original version while downloading the same.
Windows 98 ISO Technical Details:Software Name: Windows 98.ISO Image Files
Here comes a standalone but complete setup of the original Windows 98 operating system with Microsoft being the developer. This rendition offers the complete list of setup files and allows one author to validate the installation.
System Requirements for Windows 98 Download:While it looks slightly inappropriate in 2018 to enlist the system requirements pertaining to such a vintage operating system, it is always good to initiate things from the scratch. Basically, we need to have at least 16MB of RAM and a minimum of 500MB as the underlining hard disk space. The Intel 80486DX2 chipset with a clock speed of 66MHz is the bare minimum but anything synonymous with a modern day processor will also work great
Also read: Windows 2000 Download Free and Setup
Windows 98 Download – Windows 98 ISO:In this section, we have detailed the links associated with Windows 98 ISO version. While some users might be worried about the efficacy of the same, we guarantee a complete setup with every feature covered in the best possible manner. It is arguable that do we actually need something as old as this but it is always good to try the vintage stuff, once in a while.
Below is the main Link to Download Windows 98 ISO: Windows 98 SE ( 2ndEdition) – (Click to Save Bootable ISO)
If the above link does not work then you might try Mirror links below:
Windows 98 ISO (First Edition) – (OEM File needs to be clicked on and saved)
Windows 98 Download Plus Setup File – (Save File upon Clicking))
P.S. For installing any form of ZIP file, which might be required in case of the ISO version, having the 7-Zip Extractor is important. This entity allows us to unzip any.7 Zip format and save stuffs, accordingly.
Windows 98 Download – Overview and Video Guide/Demo:With Microsoft launching the Windows 98 immediately after Windows 95 met with admirable success, it became evident that most of the feature sets were improved upon. The improvements looked extremely resourceful and as the year was 1998, the OS got its name. Moreover, Windows 98 was the second 9x series operating system and most importantly an independent one which worked way better than the traditional GUI or Graphic User Interface active on MS-DOS.
Windows 98 Key Features:-Exceptional Networking Support
Active Version of Internet Explorer 4.01
Exceptional Levels of Web Integration
Better Security
Simplified Booting Process via MS-DOS
Windows comes Equipped with NetShow Player
Minimalistic Layout that Improves upon the Existing Design of Windows 95 and offers Flat Icons
Now when we have enlisted every feature associated with Windows 98, it becomes important to learn more about the installation process.
Windows 98 Download – How to Install?The complete guide towards Windows 98 installation, courtesy the availability of Windows 98 ISO setup, is given as follows:
Step by Step Guide on How to Install Windows 98 ISO Setup Files:

Firstly, we need to download the 7-Zip Extractor for the concerned OS
The next process involves downloading the Windows files, unzipping the same and extracting the ISO files in a proper way
Burn the extracted files onto a bootable device which can be used further for the installation
P.S. Users require a Virtual Box for initiating the entire process
Important Note: You would also need a Virtual Box for carrying out the whole procedure.

Firstly, we need to download the 7-Zip Extractor for the concerned OS
The next process involves downloading the Windows files, unzipping the same and extracting the ISO files in a proper way
Burn the extracted files onto a bootable device which can be used further for the installation
P.S. Users require a Virtual Box for initiating the entire process
Important Note: You would also need a Virtual Box for carrying out the whole procedure.
Summary of Win 98 Installation with Windows 98 ISO Files:Now when every detail and procedure for getting hold of Windows 98 OS is out of the way, it's time to revisit the basics and ascertain whether the readers are missing out on certain important sections. Here an indexed version of the concluded post:
Windows 98 Auto Install Iso Download Windows 10Facts about Windows 98
Windows 98 ISO Files: Introduction
Windows 98 Features
What are ISO Files?
Uses of ISO Files
Download Links for Windows 98 ISO Files
7-Zip Extractor, and Why is it Important?
How to Install Windows 98 Using ISO Files?Here is all the information needed to install Windows 98 using the existing ISO files. The full setup can be used effectively in association with 7-zip extractor, Virtual Box and the bootable interface
Going ahead, you will be able to find all the important information and all the Important Links for the Windows 98 ISO Download. Let's spread the knowledge you gained so if you find the article helpful, then share it with your friends who need to know this too.
Windows 98 Iso Full DownloadAlso read: Windows Vista Ultimate ISO Download and Setup